Struct gaia_ccsds_c2a::ccsds_c2a::tc::transfer_frame::BareBuilder

pub fn finish(self, data_field_len: usize) -> usize

Methods from Deref<Target = PrimaryHeader>§

pub fn version_number(&self) -> <B2 as Specifier>::InOut

Returns the value of version_number.

pub fn version_number_or_err( &self ) -> Result<<B2 as Specifier>::InOut, InvalidBitPattern<<B2 as Specifier>::Bytes>>

Returns the value of version_number.

#Errors

If the returned value contains an invalid bit pattern for version_number.

pub fn set_version_number(&mut self, new_val: <B2 as Specifier>::InOut)

Sets the value of version_number to the given value.

#Panics

If the given value is out of bounds for version_number.

pub fn set_version_number_checked( &mut self, new_val: <B2 as Specifier>::InOut ) -> Result<(), OutOfBounds>

Sets the value of version_number to the given value.

#Errors

If the given value is out of bounds for version_number.

pub fn bypass_flag(&self) -> <bool as Specifier>::InOut

Returns the value of bypass_flag.

pub fn bypass_flag_or_err( &self ) -> Result<<bool as Specifier>::InOut, InvalidBitPattern<<bool as Specifier>::Bytes>>

Returns the value of bypass_flag.

#Errors

If the returned value contains an invalid bit pattern for bypass_flag.

pub fn set_bypass_flag(&mut self, new_val: <bool as Specifier>::InOut)

Sets the value of bypass_flag to the given value.

#Panics

If the given value is out of bounds for bypass_flag.

pub fn set_bypass_flag_checked( &mut self, new_val: <bool as Specifier>::InOut ) -> Result<(), OutOfBounds>

Sets the value of bypass_flag to the given value.

#Errors

If the given value is out of bounds for bypass_flag.

pub fn control_command_flag(&self) -> <bool as Specifier>::InOut

Returns the value of control_command_flag.

pub fn control_command_flag_or_err( &self ) -> Result<<bool as Specifier>::InOut, InvalidBitPattern<<bool as Specifier>::Bytes>>

Returns the value of control_command_flag.

#Errors

If the returned value contains an invalid bit pattern for control_command_flag.

pub fn set_control_command_flag(&mut self, new_val: <bool as Specifier>::InOut)

Sets the value of control_command_flag to the given value.

#Panics

If the given value is out of bounds for control_command_flag.

pub fn set_control_command_flag_checked( &mut self, new_val: <bool as Specifier>::InOut ) -> Result<(), OutOfBounds>

Sets the value of control_command_flag to the given value.

#Errors

If the given value is out of bounds for control_command_flag.

pub fn scid(&self) -> <B10 as Specifier>::InOut

Returns the value of scid.

pub fn scid_or_err( &self ) -> Result<<B10 as Specifier>::InOut, InvalidBitPattern<<B10 as Specifier>::Bytes>>

Returns the value of scid.

#Errors

If the returned value contains an invalid bit pattern for scid.

pub fn set_scid(&mut self, new_val: <B10 as Specifier>::InOut)

Sets the value of scid to the given value.

#Panics

If the given value is out of bounds for scid.

pub fn set_scid_checked( &mut self, new_val: <B10 as Specifier>::InOut ) -> Result<(), OutOfBounds>

Sets the value of scid to the given value.

#Errors

If the given value is out of bounds for scid.

pub fn vcid(&self) -> <B6 as Specifier>::InOut

Returns the value of vcid.

pub fn vcid_or_err( &self ) -> Result<<B6 as Specifier>::InOut, InvalidBitPattern<<B6 as Specifier>::Bytes>>

Returns the value of vcid.

#Errors

If the returned value contains an invalid bit pattern for vcid.

pub fn set_vcid(&mut self, new_val: <B6 as Specifier>::InOut)

Sets the value of vcid to the given value.

#Panics

If the given value is out of bounds for vcid.

pub fn set_vcid_checked( &mut self, new_val: <B6 as Specifier>::InOut ) -> Result<(), OutOfBounds>

Sets the value of vcid to the given value.

#Errors

If the given value is out of bounds for vcid.

pub fn frame_length_raw(&self) -> <B10 as Specifier>::InOut

Returns the value of frame_length_raw.

pub fn frame_length_raw_or_err( &self ) -> Result<<B10 as Specifier>::InOut, InvalidBitPattern<<B10 as Specifier>::Bytes>>

Returns the value of frame_length_raw.

#Errors

If the returned value contains an invalid bit pattern for frame_length_raw.

pub fn set_frame_length_raw(&mut self, new_val: <B10 as Specifier>::InOut)

Sets the value of frame_length_raw to the given value.

#Panics

If the given value is out of bounds for frame_length_raw.

pub fn set_frame_length_raw_checked( &mut self, new_val: <B10 as Specifier>::InOut ) -> Result<(), OutOfBounds>

Sets the value of frame_length_raw to the given value.

#Errors

If the given value is out of bounds for frame_length_raw.

pub fn frame_sequence_number(&self) -> <B8 as Specifier>::InOut

Returns the value of frame_sequence_number.

pub fn frame_sequence_number_or_err( &self ) -> Result<<B8 as Specifier>::InOut, InvalidBitPattern<<B8 as Specifier>::Bytes>>

Returns the value of frame_sequence_number.

#Errors

If the returned value contains an invalid bit pattern for frame_sequence_number.

pub fn set_frame_sequence_number(&mut self, new_val: <B8 as Specifier>::InOut)

Sets the value of frame_sequence_number to the given value.

#Panics

If the given value is out of bounds for frame_sequence_number.

pub fn set_frame_sequence_number_checked( &mut self, new_val: <B8 as Specifier>::InOut ) -> Result<(), OutOfBounds>

Sets the value of frame_sequence_number to the given value.

#Errors

If the given value is out of bounds for frame_sequence_number.

pub const SIZE: usize = 5usize

pub fn frame_length_in_bytes(&self) -> usize

pub fn set_frame_length_in_bytes(&mut self, frame_length_in_bytes: usize)

Trait Implementations§

impl Deref for BareBuilder
where B: ByteSlice,

type Target = PrimaryHeader

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for BareBuilder
where B: ByteSliceMut,

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

Auto Trait Implementations§

impl Freeze for BareBuilder
where B: Freeze,

impl RefUnwindSafe for BareBuilder
where B: RefUnwindSafe,

impl Send for BareBuilder
where B: Send,

impl Sync for BareBuilder
where B: Sync,

impl Unpin for BareBuilder
where B: Unpin,

impl UnwindSafe for BareBuilder
where B: UnwindSafe,

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> R
where Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.